To Next PageTo Next Page
Need help?Do you have a question about the Microsat APRS Voyager and is the answer not in the manual?
General| Brand | Microsat |
|---|---|
| Model | APRS Voyager |
| Category | Transceiver |
| Language | English |
Physical aspects like dimensions and housing material.
Lists physical connections for RF, power, serial, Bluetooth, and telemetry.
Specifies operating temperature and humidity ranges.
Covers supply voltage and power consumption.
Details RF parameters like frequency, output power, and squelch.
Describes the integrated 7-watt transceiver for APRS packet transmission and reception.
Explains the Mic-E, Base-91, and Plain text formats for sending position reports.
Details Bluetooth options for serial console, KISS, and GPS passthrough.
Covers functionality for relaying APRS packets with simple aliases.
Lists compatible weather stations supported via RS-232 serial interface.
Explains using modules for reporting voltage and current data.
Describes connecting digital thermometers via RS-485 serial bus.
Details the LEDs (RX, TX, STAT) and connectors on the front panel.
Describes connectors on the rear panel, including RS-485, power, and USB.
Explains how to connect to an RS-485 bus for extension modules.
Details connecting a DS18B20/DS18S20 digital thermometer.
Describes the pinout and function of the MINI DIN 6-pin serial port.
Details connecting LaCrosse/Technoline weather stations via serial interface.
Explains how to connect Peet Bros Ultimeter weather stations.
Guides connecting Davis Vantage weather stations using an interface.
Outlines the steps for connecting the device to a PC via USB for configuration.
Covers reading, writing, updating firmware, and import/export of configurations.
Configures radio parameters and position reporting modes, encoding, and intervals.
Configures general digipeater functions and simple aliases for packet relaying.
Configures beacon packets, including destination, path, rate, and message content.
Sets up telemetry parameters, analog, digital channels, and WXBits outputs.
Configures settings for sending weather station reports.
Configures various external device connections including serial, Bluetooth, RS-485, GPS, and KISS.
Enables and configures test tone generation for diagnostic purposes.
Guides on pairing the APRS Voyager with the APRSDroid application on a smartphone for data exchange.
