EasyManua.ls Logo

Microsemi SmartFusion2 - Page 4

Microsemi SmartFusion2
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
• An additional Carry Out or Overflow output can be enabled.
• Normal Mode Features:
– Configurable operand widths for A0 and B0 between 2 and 18
– Configurable operand width for C between 2 and 44
– Optional assignment of operand A0 to an 18 bit two's complement constant
– Optional assignment of operand C to a 44 bit two’s complement constant
– Option to select between Multiplier followed by Adder, Subtractor or dynamic AddSub
– Optional Arithmetic Right Shift by 17 bits of the feedback input
• Dot Product Mode Features:
– Configurable operand widths for A0, B0, A1, B1 between 2 and 9.
– Configurable operand width for C between 2 and 35.
– Optional assignment of operand A0 and A1 to a 9 bit two's complement constant
– Optional assignment of Operand C to a 35 bit two’s complement constant