Need help?Do you have a question about the Microsemi SA.22c and is the answer not in the manual?
Details changes made in Revision D of the document.
Details changes made in Revision C of the document.
Details changes made in Revision B of the document.
Details changes made in Revision A of the document.
Lists typical applications of the SA.22c oscillator.
Provides physical and electrical specifications for the SA.22c.
Details mounting and connector information for the SA.22c.
Discusses thermal, humidity, and dust effects on the SA.22c.
Covers I/O connector and grounding practices for the SA.22c.
Details main input/output signals of the SA.22c.
Information on configurable hardware/software items for the SA.22c.
Discusses noise impact on SA.22c performance.
Covers unit reliability and service for the SA.22c.
Provides general installation advice for the SA.22c.
Details the unit's warm-up and stabilization process.
Explains the FLL and control loop principles of the SA.22c.
Lists common faults and checks for the SA.22c.
Information on factory service and contact details.
Guides mounting the SA.22c unit to the test board.
Explains connecting and using the SA.22c adapter test board.
Details power supply options for the test board.
Introduces MSIP for PC communication with SA.22c.
Configures terminal for MSIP communication.
Explains data encoding for customer mode in MSIP.
Notes factory mode data output is not for users.
Describes serial interface initialization steps for MSIP.
Lists connections required for 1PPS setup.
Explains GPS synchronization benefits for time/frequency.
Details SA.22c's 1PPS capabilities.
Lists requirements for 1PPS setup and operation.
Provides default damping factor and tau values for 1PPS sync.
Steps for configuring 1PPS signal synchronization.
Steps to modify damping factor and time constant.
Details factory default y coefficients.
Returns delta register and 1PPS state values.
Toggles 1PPS modes and lock indicator behavior.
Demonstrates normal 1PPS output recovery.
Shows 1PPS recovery after induced errors.
General| Brand | Microsemi |
|---|---|
| Model | SA.22c |
| Category | Power Tool |
| Language | English |
To Next Page