September 2013 1
© 2013 Microsemi Corporation
SmartFusion2 DMPM Kit
Quickstart Guide
Overview
Microsemi's SmartFusion
®
2 Digital Mixed-Signal Power Management Daughter Card Kit builds on the
SmartFusion DMPM kit by utilizing SmartFusion2 FPGA’s ability to manage up to 64 channels of both analog and
digital point-of-loads. The SF2-DMPM Daughter Board provides a bench top demonstration and development platform
for Microsemi’s SmartFusion2 MPM reference design, which incorporates eight digital regulators (controlled and
monitored through the PMBus) in addition to eight Microsemi analog regulators, which are monitored through an
external ADC. It includes a PMBus header for I
2
C communication, which can be evaluated using the included USB-I
2
C
module. The SF2-DMPM-KIT connects to the SF2-DEV-KIT through the FMC header.
Figure 1 • SF2 DMPM Daughter Board to SF2 Development Kit Through Their Respective FMC Connectors
To Next Page
