Microtek MiniLink - Page 19

E. ADMINISTRATION (cont’d)
This section of the Administration page is used for selecting the device name, changing IP
settings and changing the user name and password needed to access the system.
NOTE:
The Device name on the
Admin page of a HOST
AP will be “MicroTek
Host AP”.
The Device name on the
Admin page of a Client
SU will be “MicroTek
Client”.
For Point-to-Point
systems default IP
addresses will be as
follows:
Host AP: 192.168.1.200
Client SU: 192.168.1.201
Please see Advanced
Operation starting on
page 8 for systems
utilizing multiple Client
SU WEMs.
- 16 -