ScanWizard 5 - Standard Control Panel
ScanWizard 5 - Advanced Control Panel
C. Getting the best results
To obtain the best results when scanning with the LightLid 35, set the scan Resolution
to a minimum 600 dpi and the Scaling to 100%. Refer to the diagrams below for more
information on how to set these values in ScanWizard 5 Standard and Advanced Control
Panels.
Microtek LightLid 35 Installing and Getting Started 3
Set Scaling here to 100%
Click the Purpose button to
select your Resolution value.
When the drop-down menu
appears, select Custom and
type 600 at the dpi box, as
shown below.
Set Scaling here to
100%
Set Resolution here to
600 dpi
Settings window
in Mac OS 9.x
Settings window
in Mac OS X
Settings window in Windows
To Next Page
Loading...
