EasyManua.ls Logo

Microtest TSB-67 - 568A Annex E - Page 52

Default Icon
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• Battery life: 8+ hours operation
• AC: 9V DC - 1 amp AC adapter for continuous operation or charging
User Interface
• x 64 Graphic LCD with backlight
• cm x 3.8 cm (2.25” x 1.5”) display area
• Elastomeric keypad with tactile feedback, numeric input, dedicated functions, 4 soft functions
and cursor pad
• Context-sensitive help and operating instructions
• Tone generation audio for warning or other user feedback
• Date stamp of all tests
Environmental
• Operating Temperature: 0 to 50° C (32 to 122° F)
• Storage Temperature: -10 to 55° C (14 to 131° F)
• Operating Humidity (non-condensing): 10 to 90%
• Storage Humidity: 5 to 95%
Measurement Ports
•
PentaScanner+
: BNC and 36-pin connector that withstands in excess of 20,000 mating cycles
•
PentaScanner
/
PentaScanner
Cable Admin
: BNC and shielded Modular 8 (RJ-45)
connector
• Testing of all four pairs on RJ-45 is fully supported
Serial Port
• Connector, Cable: DB-9
• Baud rate: 300 to 38,400 baud
• Parity: NONE
• Length: 8 Bits
• Handshaking: None, RTS/CTS, and XON/XOFF
Memory
• Control: Flash memory allows electronic upgrading in remote locations
• Test Storage: Up to 500 complete Autotest results can be stored in permanent flash memory
(
PentaScanner+
). Up to 500 complete Autotests results can be stored in battery-backed
memory (
PentaScanner
,
PentaScanner
Cable Admin
)
Autotest Functions
• Full suite of tests to determine if cable meets generic cabling or network type requirements
(TIA/EIA TSB-67, ISO Class C, D, 10-BASE-T, Token Ring, Fast Ethernet, ATM 155 etc.)
• Up to 20 user definable Autotest programs
Wire Map
• Uses Injector for complete mapping of wiring at both ends of the cable
• Finds miswires, opens, shorts, split pairs
• Includes test of shield if connected