Need help?Do you have a question about the Microtest MICROSCANNER and is the answer not in the manual?
Explains the function of the device's buttons for navigation and operation.
Details how to select and change the desired test mode on the device.
Procedure to enter calibration mode for accurate cable length measurements.
Adjusting the Nominal Velocity of Propagation for precise cable length testing.
Information on battery type, charging, and high voltage protection features.
Displaying hardware and software version numbers of the device.
Verifies twisted-pair cabling for opens, shorts, crossed pairs, and reversed pairs.
Checks patch cable integrity and wiring using the wiremap function.
Measures the physical length of twisted pair or coaxial cables.
Identifies network hubs and link status for 10/100 connections.
Measures coaxial cable length and identifies its termination state.
Locates office cable drop terminations by identifying wall outlets at the patch panel.
Identifies specific office locations for twisted pair/coax drops in distribution panels.
Uses multi-tone signals to trace hidden cables in walls, ceilings, and panels.
Physical size and weight details for the device and its adapters.
Operating conditions, supported cable types, and network applications.
Details on test ports, NVP, and length measurement limits for calibration.
To Next Page
General