MICROSCANNER
ENGLISH - 14
3. When MICROSCANNER displays PC and
the cable length, press the MODE key to
activate the blinking Hub light.
Pair Length
If ▲▼ are displayed, you will be able to show
detailed pair information for each standard
conductor pair.
1. Press the
▲
key to display Pair 1 - 2 length.
2. Press the
▲
key again to display the other
pair combinations.
The pair length is not measured if the cable is too
long, connected to a hub, or a wiremap adapter is
used.
Pair 1 - 2 Length Pair 1 - 2
not measurable
To Next Page
Loading...
Need help?
General
