Middle Atlantic Products RLNK-915R User Manual

I-00785 Rev C
Select Series PDU with RackLink™
Quick Start Guide
Monitor | Control | Alert | Report | Analyze
Thank you for purchasing a Select Series PDU with RackLink™ product. Please read these
instructions thoroughly before installing this product.
PRODUCT FEATURES
THANK YOU
• Available in horizontal rack (RLNK-915R), half rack (RLNK-415R), compact (RLNK-215), and
vertical (RLNK-1015V and RLNK-1615V) models.
• Remotely reboot connected equipment.
• Integrated sequencing.
• Set email alerts.
• Access the following link for software downloads, firmware updates, and the Select Series PDU
with RackLink User Manual:
www.middleatlantic.com/downloads

Middle Atlantic Products RLNK-915R Specifications

General

Model	RLNK-915R
Type	Power Distribution Unit
Input Voltage	120V
Input Frequency	50/60 Hz
Output Voltage	120V
Maximum Current	15A
Number of Outlets	9
Outlet Type	NEMA 5-15R
Cord Length	15 ft
Mounting	Rackmount
Rack Units	1U
Enclosure Material	Steel
Weight	5 lbs

Summary

Thank You and Product Overview

Product Features

Highlights key features like model availability, remote reboot, sequencing, and email alerts.

Important Safety Instructions

Safety Guidelines and Warnings

General safety instructions, warnings, cautions, and notes for product installation and use.

Supplied Components and Hardware

Horizontal Models

Lists components for horizontal rack models RLNK-915R and RLNK-415R.

Compact Model

Lists components for the compact RLNK-215 model.

Vertical Models

Lists components for vertical models RLNK-1015V and RLNK-1615V.

Required Tools

Phillips Screwdriver

Specifies the required #2 Phillips screwdriver for installation.

RackLink Hardware Setup

Installing Vertical Models in Enclosure

Step-by-step guide for mounting vertical RLNK-1015V/1615V PDUs in an enclosure.

Installing Compact Model in Enclosure

Instructions for mounting the compact RLNK-215 model in an enclosure.

Networking and Access

Networking Defaults

States default network configuration: DHCP and static IP 192.168.1.200.

Installing Device Discovery Software

Guide to downloading and installing software for device discovery.

Accessing RackLink via Browser Interface

Steps to launch and access the device's browser-based interface.

Alert LED States and Firmware Updates

Alert LED States Interpretation

Explains the meaning of various states indicated by the ALERT LED.

Updating RackLink Device Firmware

Procedure for accessing and uploading new firmware to the device.

Troubleshooting Common Issues

Forgotten Password Recovery

Steps to reset the device password and network settings.

User Interface Access Problems

Troubleshooting steps for not being able to access the user interface.

Post-Firmware Upgrade Operation

Guidance for units not operating after a firmware upgrade.

RackLink Not Receiving Power

Checks for power cable connection and circuit breaker status.

Warranty Information