Midea AC120-19ARB User Manual

7
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTION
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.
Thoroughly remove soap film with dry cloth.

Midea AC120-19ARB Specifications

General

Timer	Yes
Display	LED
Placement	Floor
Control type	Touch
Product color	Black, Grey
Auto oscillating	No
Number of speeds	3
Water tank capacity	7 L
Timer duration (maximum)	24 h
AC input voltage	220 - 240 V
Power source type	AC
AC input frequency	50 Hz
Power consumption (typical)	65 W
Package type	Box
Package depth	349 mm
Package width	403 mm
Package height	1126 mm
Package weight	13500 g

Weight and Dimensions

Depth	270 mm
Width	345 mm
Height	1050 mm
Weight	10500 g