38
Open the front panel of the indoor unit.
Locate the MANUAL CONTROL button on the
right-hand side of the unit.
Press the MANUAL CONTROL button one time to
activate FORCED AUTO mode.
Press the MANUAL CONTROL button again to
activate FORCED COOLING mode.
Press the MANUAL CONTROL button a third time
to turn the unit o.
Close the front panel.
Manual Operation(without remote)
The manual button is intended for testing purposes and emergency operation only. Please do
not use this function unless the remote control is lost and it is absolutely necessary. To restore
regular operation, use the remote control to activate the unit. Unit must be turned o before
manual operation.
For product use
CAUTION :
●
●
●
●
●
●
To operate your unit manually:
Manual
control
button
To Next Page
Loading...
Need help?
General
