How to Use Advanced Functions
LED DISPLAY
TURBO Function
When you select TURBO feature in COOL mode, the unit will blow cool air
with strongest wind setting to jump-start the cooling process.
When you select TURBO feature in HEAT mode, the unit will blow heat air
with strongest wind setting to jump-start the heating process(some units).
For units with Electric heat elements, the Electric HEATER will activate and
jump-start the heating process.
Press TURBO button
TURBO
CLEAN function
CLEAN
Airborne bacteria can grow in the moisture condenses around heat exchanger in the
unit. With regular use, most of this moisture is evaporated from the unit. By pressing
the CLEAN button, your unit will clean itself automatically. After cleaning, the unit will
turn o automatically. Pressing the CLEAN button mid-cycle will cancel the operation
and turn o the unit. You can use CLEAN as often as you like.
NOTE: You can only activate this function in COOL or DRY mode.
Keep pressing this button more than 5 seconds,
the indoor unit will display the actual room
temperature. Press more than 5 seconds again
will revert back to display the setting temperature.
Press this button to turn on and turn o
the display on the indoor unit.
5s
Press this button more
than 5 seconds(some units)
LED
LED
46
To Next Page
Loading...
Need help?
General
