Midea Arctic King ARF18MW2 - Page 15

3. Disengage the door of freezing chamber.
Do or of freezin g chamber
4. Disengage the middle hinge subassembly
with the cross screwdriver and fixed
hinge screws for later use.
Middl e hinge subassembl y
5. Disengage the door of refrigerang
chamber.
Door of refrigerating door
6. Disengage the boom hinge from the le
side of the chamber with the cross
screwdriver, install it on the le side of
the chamber, and screw off the hinge
screw bolt to install into the le stopple
of the hinge.
Bottom hinge
Hinge screw bolt
7. Disengage the bushing and limit stop
from the right side of the door of
refrigerang chamber respecvely, and
install them on the le side of the door
(use two screws to fasten the door limit
stop).
Bushing
Door limit stop
14