Midea Arctic King ARF18MW2 - Page 16

8. Install the door of refrigerang chamber
onto the chamber, keep the axle center of
bushing aligned to the center of screw
bolt of boom hinge, and then put down
the door naturally. Install the middle
hinge on the le side of chamber and
fasten it with three screws.
Middle hinge subassembly
Door of refrigerating
chamber
9. Take off the top and boom bushing from
the door of freezing chamber, and install
them into the axle holes aligned to the
axle center on the le side of the door.
10. Align and install the center of le top
hinge onto the axle center on the le side
of the door, and fasten the le top hinge
with 3 screws aer the door of freezing
chamber is fastened.
L ef t t o p h i n g e
T o p h i n g e b u sh i n g
D o o r o f fr eezi n g
ch am b er
11. Install the le hinge guard and hinge
stopple cover onto the chamber.
Left hinge guard
Hinge s topple cover
12. Take off the handle caps and handle
stopples.
Handle cap
Handle stopple
15