Operating Instructions
1 COOLING OPERATION (Operat
in
g temperature range: 17°C-30°C/62°F-88°F)
- Press the
"M
ODE" button several times until the "COOL" indicator light comes on.
- Press the "TEMP
SETTING" buttons "A" or "
T"
to select your desired room temperature.
The temperature can
be
set within a range of 17°C-30oC/62°F-88°F.
- Press the "FAN SPEED" butt
on
to choose the fan speed.
2 DEHUMIDIFYING OPERATION (Operating temperature range: 13°C-30°C/54°F-88°
F)
- Press the "MODE" button several times until the "DRY" indicator light comes on.
- Under this mode, you cannot
select a fan speed or adjust the temperature. The fan motor
operates at High speed.
- Keep windows and doors
closed for the best dehumidifying effect.
-
Do
not put the duct to window.
CAUTION: Duri
ng
Cooling and dehumidifying modes, if the compressor cycle
is
interrupted
(unplugged, power
fa
i
lu
re
, etc.) and reinstated immediately thereafter, a compressor
protecti
on
circuit is automatically
initiated.
The compressor cannot operate dur
in
g
a compressor p
ro
tecti
on
condition. It may take about 3 minutes before the protection
circuit
se
lf-deactivates.(This is normal)
3 FAN OPERATION
- Press
th
e "MODE" button several tim
es
until the
"FAN
" indicator light comes on .
- Press the
"
FAN
SPEED"
bu
tton 0
ch
oose the fan speed. The temperature cannot
be
adjusted.
-
Do
not put the duct to window.
4 WATER DRAINAGE
You
can choose water tank drainage or continuous drainage.
5 TIMER OPERATION
The AUTO-TIMER
fea
u e offers a u i
qu
e option
to
pre-set the
on
and off times of the
un
it
vi
a a 0.5 hr
to
24hr
timer.
Note: The Mode,
Fa
n Speed a
nd
Temp
erature settings must
be
selected prior to
us
i
ng
th
e Auto-Timer function.
1) Timer-Off setting.
Please
be
aware that in o
rd
e fo e
Tim
er-Off function
to
work properly, the unit must
be
power
ed
on
.
Example: If at 8:00
pm
the
Tim
er-Off is set
at
2.0, then the unit will automatically power off
and
stop cooling
at
10
:
00
p.
m.
or after 2 hours have elaps
ed
. **
a)
Push
the Timer-Off button: - The display will indicate the number of hours unt
il
the unit shuts off.
b)
Press or hold the Timer-O
ff
bu
on
until the display window indicates the number of hours that
is
desired
for the unit to continue runni
ng
.
c)
After a 5 second delay, the di
sp
l
ay
will switch back from the time increment to
th
e
de
sired temperature
setting
To Next Page
Loading...
