To Next PageTo Next PageWhy is my Midea Everstar MPM-05CE-BB7 Air Conditioner not cool enough?
Your Midea Air Conditioner might not be cooling effectively due to several reasons: * Ensure all windows and doors are closed. * Remove any heat sources from the room. * Make sure the exhaust air duct is properly connected and not blocked. * Lower the set temperature. * Clean the air filter.
What to do if my Midea Everstar MPM-05CE-BB7 power shuts off in heating mode?
If your Midea Air Conditioner shuts off in heating mode, it's likely due to the automatic overheat protection function or because the temperature at the air outlet exceeded 70°C/158°F. To resolve this, switch it on again after it has cooled down.
What to do if the compressor of my Midea Air Conditioner does not work and the digital display area shows "P2"?
If the compressor of your Midea Air Conditioner isn't working and the display shows "P2", it indicates that the bottom tray is full. Remove the drain plug and drain the water outside.
Why is my Midea Air Conditioner making a gurgling sound?
The gurgling sound you hear in your Midea Air Conditioner is normal. It comes from the flowing of the refrigerant inside the air conditioner.
General| Brand | Midea |
|---|---|
| Model | MPM-05CE-BB7 |
| Type | Portable Air Conditioner |
| Cooling Capacity | 5000 BTU |
| Room Coverage | 150 sq. ft. |
| Power Supply | 115V/60Hz |
| Refrigerant | R410A |
| Warranty | 1 year |
| Voltage | 115V |
| Dehumidification Capacity | 1.2 pints per hour |
Details the functions of each button on the control panel, including mode, fan speed, and timer settings.
Instructions for installing the window kit for various window types, including measurements.
Procedures for temporary and permanent duct installation, including adaptor usage and hose length.
Guidance on handling the water tank, its safety features, and drainage procedures during installation.
Details electrical requirements, grounding, and initial setup steps before operating the unit.
Guides on operating the unit in different modes, selecting fan speeds, and adjusting temperature.
Instructions for setting the auto-timer to control the unit's on and off times.
Explains how to manage water accumulation, including tank drainage and continuous drainage options.
Instructions for cleaning and maintaining the air filter for optimal performance.
Guidelines for cleaning the unit enclosure and properly storing the power cord.
Steps for preparing the unit for extended periods of non-use, including draining.
Addresses issues like unit failure to start, full water tank, or poor cooling performance.
Covers power shutoff during heating, unusual noises, vibrations, and compressor behavior.
