Midea French-Door Series - Crashing Ice Motor; Air Duct Components in Freezing Chamber and Fan Motor

Service Manual_2020-V1.0
39
7.7 Crashing ice motor
disassembly of crashing ice motor
On the basis of disassembling the fan component in
section 7.5, remove 4 screws in the red circle, and
change the crushed ice motor.
7.8 Air duct components in freezing chamber and fan motor
Air duct components in freezing chamber
1）Remove 2 screws in the red circle, hold the obliquely
upward-pull air duct cover plate at the location indicated
by the arrow;
2）Disconnect the wiring connector.