Service Manual_2020-V1.0
56
Installation of external waterway
Connect the refrigerator to the drinking water supply
system.
1) Turn off the main water supply pipeline first, and find
the closest cold water introducing pipe;
2) Connect the water valve with cold water introducing
pipe;
3) Directly insert the drinking water pipe into the water
connector at the back of the refrigerator (supply);
4) Open the main water supply pipeline to check the
water leakage.
Note: Check the water pressure, automatic ice-making
run requires the water pressure between 30psi
and100psi, if not, you may need to buy a booster.
To Next Page
Loading...
