6
If the indicator flashes (off after 10 seconds), it indicates insufficient water or low
water level, please check whether the float in the sink of the host has floated or
the water tank is properly placed.
Note:
INSTRUCTIONS FOR USE
Instructions on humidification function
• Remove the water tank from the host, and unscrew the water tank cap count-
er-clockwise.
• Fill the water tank with cold water, tighten the water tank cap and check for leakage.
• As is shown, put the water tank into the host according to the angle, and wait a few
minutes until the host sink is filled with water.
• After the humidification button is pressed, the indicator lights up to start humidifica-
tion.
To Next Page
Loading...
