Installed
dismantled
Installation of brush
Installation of seam clamp
9
Snap the brush top end on the upper
edge of iron head, and fasten the brush
when the iron head is aligned with the
boss of brush lower edge.
Dismantle in reverse after use.
Snap the clamp top end on the upper
edge of iron head, with lower boss
snapped below.
Dismantle in reverse after use. .
Installed
dismantled
Ironing of tro use rs
Warm t i ps:
Method
In case of requirements from clients for
trousers axis,use the seam clamp for aid.
Fix the trouserss axis by setting the seam clamp,
press the spanner,and iron from the top downwards.
No overbending or U-shaped windpipe is allowed during ironing.
To Next Page
Loading...