1.Hang up the clothes
2. Fill the water tank.
3.Put the tank back,
and start the machine.
6
Instructions
Preparations
1
4
Instructions to removal and installation of handle control box and
replacement of battery
Press firmly
Battery insulation sheet
1.For the first time, pry the handle control box.
2.Press the battery snap, so that the battery can bounce.
3.Remove the battery, then remove the battery
insulation sheet, and then install the battery and
the control box.
Warm tips:
1.When the handle remote controller is insensitive,
replace the battery.
2.If unused for a long period, remove the battery in
order to save the battery power.
3.Please use the CR2450 battery.
To Next Page
Loading...