Midea GZ20D2W - Controls and Operation Modes

7
a
Warm tips:
1.Press in the "Power" key, and wait a minute so that the steam will come out.
2.The steam amount is maximum in the "6" gear, and the steam amount is minimum in
the "1" gear.
2
Key Control
3
Hand Control
1.Start
Press the "Power" key to start the machine.
2.Functions
Press in the "Function" key to select the appropriate gear.
3.Clean reminder
When the " " indicator light on the main machine flashes,
please clean the water tank and the main machine.
Press and hold the "Function" key for 5 seconds to restore.
"Power" and "Function" keys on the handle are equivalent to
keys on the main machine; refer to the above instructions
for "Key Control".
Power
Functions
Function
Power
4
Intelligent sensing steam control (non-holding sensing)
1.In the ironing process, when placing the hot head on the hot headstock and releasing your hand,
the steam stops.
2.After holding the hot head by hand, the hot head recovers generation of steam.
3.If there is no operation for a long time (10 minutes or more), the machine will automatically shut
down, and will restart by re-pressing the "Power" key.
Ｉｆ ｔｈｅ ｈａｎｄ ｃｏｎｔｒｏｌ ｍｏｄｕｌｅ ｃａｎ＇ｔ ｗｏｒｋ，ｐｌｅａｓｅ ｒｅｆｅｒ ｔｏ ｔｈｅ ｆｏｌｌｏｗｉｎｇ ｏｐｅｒａｔｉｏｎｓ
ｆｏｒ ｃｏｄｉｎｇ ｗｉｒｅｌｅｓｓ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ．
１．Ａｆｔｅｒ ｉｎｓｔａｌｌ ｔｈｅ ｂａｔｔｅｒｙ ｉｎｔｏ ｔｈｅ ｈａｎｄ ｃｏｎｔｒｏｌ ｍｏｄｕｌｅ，Ｐｒｅｓｓ ａｎｄ ｈｏｌｄ ｔｈｅ “Ｆｕｎｃｔｉｏｎ” ａｎｄ
“Ｐｏｗｅｒ”ｂｕｔｔｏｎ ａｔ ｔｈｅ ｓａｍｅ ｔｉｍｅ，ｋｅｅｐ ｓｔｉｌｌ．
２．Ｔｕｒｎ ｏｎ ｔｈｅ ｐｏｗｅｒ，ｔｈｅ ｉｎｄｉｃａｔｏｒ ｏｆ “１”ｇｅａｒ ｉｓ ｆｌａｓｈｉｎｇ，ｔｈａｎ ｒｅｌｅａｓｅ ｔｈｅ “Ｆｕｎｃｔｉｏｎ”
ａｎｄ “Ｐｏｗｅｒ”ｂｕｔｔｏｎ，ａｎｄ ｐｒｅｓｓ ｔｈｅ “Ｐｏｗｅｒ”ｂｕｔｔｏｎ ｏｎ ｔｈｅ ｈａｎｄｌｅ ｔｗｉｃｅ，ｃｏｄｉｎｇ ｗｉｒｅｌｅｓｓ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｗｉｌｌ ｂｅ ｓｕｃｃｅｅｄ，ａｌｌ ｔｈｅ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔｓ ｆｌａｓｈ ｏｎｅ ｔｉｍｅ，ｔｈｅ ｈａｎｄ ｃｏｎｔｒｏｌ
ｍｏｌｄｕｌｅ ｃａｎ ｗｏｒｋ ｉｎ ｎｏｒｍａｌ．
Ｎｏｔｅ：１．Ｏｎｌｙ ｗｈｅｎ ｔｈｅ ｈａｎｄ ｃｏｎｔｒｏｌ ｍｏｄｕｌｅ ｉｓ ｗｏｒｋｉｎｇ，ｔｈｅ ｉｎｔｅｌｌｉｇｅｎｔ ｓｅｎｓｉｎｇ ｓｔｅａｍ ｃｏｎｔｒｏｌ
ｗｉｌｌ ｗｏｒｋ ｉｎ ｎｏｒｍａｌ．
２．Ｉｆ ｔｈｅ ｈａｎｄ ｃｏｎｔｒｏｌ ｍｏｄｕｌｅ ｉｓ ｎｏｔ ｗｏｒｋｉｎｇ，ｐｌｅａｓｅ ｃｈｅｃｋ ｔｈｅ ｂａｔｔｅｒｙ ｐｏｗｅｒ，ｔｈｅ ｉｎｄｉｃａｔｏｒ
ｌｉｇｈｔ ｏｎ ｔｈｅ ｈａｎｄｌｅ ｗｉｌｌ ｆｌａｓｈ ｗｈｅｎ ｙｏｕ ｕｓｅ ｉｔ ｉｎ ｔｈｅ ｎｏｒｍａｌ．
３．Ｃｈｅｃｋ ｗｉｒｅｌｅｓｓ ｃｏｄｉｎｇ ｏｆ ｔｈｅ ｈａｎｄ ｃｏｎｔｒｏｌ ｍｏｄｕｌｅ ｉｓ ｃｏｒｒｅｃｔ ｏｒ ｎｏｔ．
Power Functions