Electronic Work
- Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
- The appliance shall be stored in a room without continuously operating ignition sources
(for example: open flames, an operating gas appliance or an operating electric heater).
- Do not pierce or burn.
- Be aware that the refrigerants may not contain an odour.
- Appliance should be installed, operated and stored in a room with a floor area according to
the amount of refrigerant to be charged. For specific information on the type of gas and the
amount, please refer to the relevant label on the unit itself. When there are differences
between the label and the manual on the Min.
room area description, the description on label shall prevail.
- Appliance shall be installed, operated and stored in a room with a floor area larger than 4 m
2
.
Appliance shall not be installed in an unvertilated space, if that space is smaller than 4 m
2
.
- No open fire or device like switch which may generate spark/arcing shall be around
appliance to avoid causing ignition of the flammable refrigerant used. Please follow the
instructions carefully when storing or maintaining the appliance to prevent mechanical
damage from occurring.
WARNING:
WARNING for Using R32 Refrigerant
BEFORE PERFORMING ANY ELECTRICAL OR WIRING WORK, TURN OFF THE
MAIN POWER TO THE SYSTEM.
DISPLAY
MAIN
CONTROL
POWER
SUPPLY
CORD
NOTE: The cographs are for explanation purpose only.
Your machine may be slightly different.
The actual shape shall prevail.
CAUTION:
Risk of fire
flammable materials
Explanation of symbols displayed on the unit
CAUTION
CAUTION
CAUTION
This symbol shows that the operation manual should be read carefully.
This symbol shows that a service personnel should be handling this
equipment with reference to the installation manual.
This symbol shows that information is available such as the operating
manual or installation manual.
To Next Page
Loading...
