Service Manual_2018-V1.0
17
3. In case the machine is not in use for a long time, turn off the heating switch or the refrigerating
switch to save power.
4. In case the machine is not needed for a long time, please take off the plug, turn off the copper
chrome-plated ball valve and drain off the remaining water through the outlet. For another use,
discharge water for 10 min. In the event that the machine is blocked by ice due to the environment
below ice point, keep the refrigerating switch closed for 4 hours and then turn it on to continue the
operation.
5. In case the water supply is cut off, please close the feed water ball valve and cut off the power,
after water re-supply, please open the other faucets to discharge sediment and then turn on the feed
water ball valve.
6. The machine must use an earthed three-pin socket and a reliable creepage protection switch.
7. Never use organic solvents such as gasoline to clean the machine: strictly prohibit washing the
machine with water or splashing water to the machine.
8. Never turn on (off) the machine by inserting the plug into (pulling the plug out from) the socket.
Never increase the length of the supply cord to avoid fire.
9. If the supply cord is damaged, it must be replaced by the manufacturer or qualified person so as
to avoid a hazard.
10. The water source for the water purifier is civil tap water.
11. Never dismantle spare parts of the machine to avoid water leakage or damage.
12. Never turn the machine upside down or lean it more than 45° when moving it so as to avoid any
damage to it or any accident.
13. Limited warranty: electrical components and water system are warranted for 12 months from
date of purchasing.
3. Product technical characteristics production
3.1 Selling point summary
1. Fresh pure water: four stage high-precision filtration to ensure effluent water quality.
2. Compressor for cooling: adopt stable, high-efficiency and low noise compressor
3. Childproof faucet: adopt childproof faucet for hot water to guarantee children’s safety.
4. Quadruple anti-dry burning protection: filtered water was provided to hot tank in priority,
water level control system identifies the water level automatically, double protection of
thermostat, quadruple anti-dry burning protection system.
5. Quick connect fitting technology: adopt Korean quick connect fitting technology which has
outstanding sealing and no water leakage.
6. The indicators blink: when all the indicators on the front panel begin to blink, it means that
the water leakage detection plate on the base plate is soaked by the water. It may cause by
external water which splashes on the base plate or the leakage of the unit.
7. The solution to recover it is to dry the base plate, and then power on the unit.
To Next Page
Loading...
Need help?
General
