OPERATION MANUAL KJR-29B/BKE-E
6
3. Buttons And Their Functions
(1) Remote signal receiving function
There is the signal receiver for wireless remote controller on the KJR-29B.You can use the
wireless remote controller to control the air-conditioner through the wired remote controller when
the system has been powered on.
Notes: The wired controller will not receive the swing controlling instruction. For the indoor unit with swinging
function, you can directly use the remote controller to control swinging through the display panel of the indoor unit,
or use the swing button on the wired remote controller to control the indoor unit for swinging.
(2) ON/OFF button
Press the ON/OFF button to control the indoor unit on and off status. When the unit is turned off,
press the ON/OFF button, the unit will be turned on and the operating icon lights up. When the
unit is turned on, press the ON/OFF button, the unit will be turned off and the operating icon lights
off.
(3) Mode button
Press the mode button to set the operating mode, after each button press the operation mode will
circle as follow:
When the controller has been set to cool-only, then there is no HEAT mode.
(4) Fan speed setting
Under COOL, HEAT and FAN modes, press the fan speed button can adjust the fan speed
setting. After each fan speed button press will circle as follow:
AUTO→LOW→MID→HIGH→AUTO
Under AUTO and DRY modes, the fan speed is not adjustable and the default fan speed is auto.
To Next Page
Loading...
Need help?
General
