20
NOTE: The weekly timer setting can be returned to the previous step by pressing BACK.
The current setting is restored. The controller will not save the weekly timer settings if there
is no operation within 30 seconds.
Weekly Timer Operation
1. Press TIMER to select the week, and then the timer starts automatically.
Timer
To start
Fig. 36 - Weekly Timer Operation
2. Press POWER to cancel the timer mode. The timer mode can also be canceled by changing the
timer mode using TIMER.
Timer
To cancel
Fig. 37 - Power and Timer
To set the DAY OFF (for a holiday)
1. After setting the weekly timer, press CONFIRM.
-
+
Conrm
Fig. 38 - Confirm
To Next Page
Loading...
