Midea MAP07S1AWT

APP INSTRUCTIONS
Specification of Wireless Module
Operation Temperature: 0°C ~ 45°C / 32°F ~ 113°FWireless Module Model: US-SK109
Operation Humidity: 10% ~ 85%Antenna Type: Printed PCB Antenna
Power Input: DC 5V / 500 mAFrequency Band: 2400 - 2483.5MHz
Maximum TX Power: < 20dBm
Precautions
1. Supports operating systems: iOS 10+ or Android 5+.
2. In the event of a OS update, there may be a delay between the update of the OS and a related software
update during which your OS may or may not be supported until a new version is released. Your specific
mobile phone or problems in your network may prevent the system from working and Midea will not be
responsible for any problems that could be caused by incompatibility or network issues.
3. This Smart AC only supports WPA-PSK/WPA2-PSK (recommended) encryption.
4. To ensure proper scanning of the QR code, your smart phone must have at least a 5-megapixel camera.
5. Due to unstable network connectivity, requests may time out. If this happens, re-run the network
configuration.
6. Due to unstable network connectivity, commands may time out. If this happens, the smartphone app and
the actual product may display conflicting. The information displayed on the actual product is always the
most accurate available. Refresh the app to re-sync.
Midea will not be responsible for any problems that could be caused by incompatibility or network issues, your
wireless router and mobile phone.
NOTE
27