EasyManua.ls Logo

Midea MAP08S1XWT - Page 25

Midea MAP08S1XWT
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MODE
Scrolls through operation
modes as follows:
TEMP
Increases temperate in
1°C/1°F increments.
Max. temperature is
30°C/86°F.
SPEED
SLEEP
Saves energy during
sleeping hours.
LED DISPLAY
Press this button to turn
on and turn o the
display on the indoor unit.
°C/°F
TEMP
Decreases temperate in
1°C/1°F increments.
Min. temperature is
16°C/60°F.
TIMER
ON/OFF
Turns the unit on or o.
C-SENSE
Temperature sensing and room
temperature display button.
SWING
Model: RG51F2(2)/CEFU1
Starts and stops the
horizontal louver
movement. Hold down
for 2 seconds to initiate
vertical louver auto
swing feature(some units).
AUTO
COOL DRY
HEAT
FAN
Selects fan speeds in the
following order:
AUTO
LOW
MED HIGH
Sets timer to turn unit on
(see How to Use Basic
Functions for instructions).
Sets timer to turn unit o
(see How to Use Basic
Functions for instructions).
Press this button to
alternate the temperature
display between the
°C & °F.
NOTE: Press together the two buttons simultaneously for 5 seconds to lock the keyboard.
Press together the two buttons for 2 seconds to unlock the keyboard.
Press together simultaneously
Before you begin using your new air conditioner, make sure to familiarize yourself with
its remote control. The following is a brief introduction to the remote control itself. For
instructions on how to operate your air conditioner, refer to the How to Use Basic
Functions section of this manual.
Buttons and Functions
Model: RG51F2(2)/EFU1
C-SENSE
HEAT
25

Related product manuals