1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the TEMP
or TEMP button.
Page 25
Remote Control
and App
Instructions
ATTENTION! Before operation, please
ensure the unit is plugged in and power
is available.
AUTO Mode
SETTING TEMPERATURE
The operating temperature range for units
is 60-86°F (16-30°C).
You can increase or decrease the set
temperature in 1°F (1°C) increments.
In AUTO mode, the unit will automatically
select the COOL, FAN, or HEAT function
based on the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can’t be set in AUTO
mode.
COOL ModeBasic operation
1
3
2
4
3. Press FAN button to select the fan
speed: AUTO, LOW, MED, HIGH .
4. Press the ON/OFF button to start the
unit.
1
3
2
How to Use Basic Functions
To Next Page
Loading...
Need help?
General
