Midea MAV160-A2808PS/01FM-US - Page 26

Service manual for Washing Machine
-------------------------------------------------------------------------------------------------------------------------------------------------------
－ 26 －
Check the
inlet valve.
Replace if
failure.
The resistance on coil should be between
0.7-1.2KΩ.
Check the
water level
sensor
Test the electric
capacity between
terminal 1 and terminal
2, terminal 2 and
terminal 3. If the
capacity is not in range
from 40nF to 50nF,
replace the water level
sensor.
replace the
PCBs
1
2
3
Test the resistance between terminal
1 and terminal 3. If the resistance is
not in range from 20 to 40 Ohms,
replace the water level sensor.