B
Brittany JacksonAug 14, 2025
What does error E1 mean on a Midea MA200W95 Washer?
- DDanny GarciaAug 14, 2025
If the Midea Washer displays 'E1', it signifies an alarm for abnormal water intake. Verify if the water tap is opened.
To Next PageTo Next PageWhat does error E1 mean on a Midea MA200W95 Washer?
If the Midea Washer displays 'E1', it signifies an alarm for abnormal water intake. Verify if the water tap is opened.
What to do if my Midea Washer is draining abnormally?
If your Midea Washer isn't draining properly, it might be due to several reasons: * The water drain hose is placed too high - adjust the height. * The end of the drain hose is sealed - unseal it. * The internal rubber ring of the drain valve is blocked - clean the rubber ring.
Why is my Midea Washer spinning abnormally?
If your Midea Washer is not spinning correctly, consider the following: 1. Ensure the door lid is closed. 2. Rearrange clothing if it's piled on one side or excessively loaded. 3. Place the washer on a flat surface to ensure stability. 4. Tighten the motor belt if it is loosened.
What to do if my Midea MA200W95 Washer shows error code E4?
If the Midea Washer displays 'E4', it indicates an alarm because the washing is staying on one side. To resolve this, manually balance the clothes in the barrel by hand.
What does error code E3 mean on my Midea Washer and how to fix it?
If the Midea Washer displays 'E3', it means the alarm is triggered because the lid is not closed. Close the lid and press the 'Start' button to resume operation.
What does it mean when my Midea Washer shows error E2?
If the Midea Washer displays 'E2', it indicates an alarm because the water drain has not finished. Check the water level sensor and drain pump to troubleshoot the issue.
General