Models
MAW08V1QWT
MAW10V1QWT
MAW12V1QWT
Window Type
Air Conditioner
You must follow the user manual for
detailed installation instructions
Before using your air conditioner, please read
the user manual carefully and keep for future
reference. For additional support, please call
customer service at 1-866-646-4332.
version A - 03 - 2020
Installation Guide
Scan the following QR code for an installation video.
Window Sash Lock
Thick Window Sash Seal Foam
Thin Window Sash Seal Foam
Miscellaneous Sealing Foam
Additional Side Arm Foam
1” Type A Screw 2
2
1
1
1
1
1.1 Adjust the left extension arm out and install
the right extension arm. Set the bracket in
your window.
1.2 Adjust the angled support arms until
they touch the exterior wall. Check that
the bracket is properly tilted downwards
toward the outdoors. Install the support
pins and cotter pins then extend the left
and right extension arms.
Center this part of the
bracket with the center
of the windows.
Extend the Extension Arms until they touch the
Windowsill and the Spring Pin locks in place.
Depending on the
level used, place at
either location below
to check level.
WARNING
Do not use any devices or materials for
installation that are not recommended in
this manual.
NOTICE
Maximum window thickness including
non-removable handle: 2-7/8”
Cotter Pin
Spring
Pin
Locks
Spring Pin Locks
WARNING
• Bracket should only be used for its intended purpose. If not, the warranty will be voided.
• You must follow the detailed installation instructions in the user manual.
WARNING
Maintain control of the bracket until
installation is complete.
To Next Page
Need help?
General
