1
2
3
5
4
6 7 8 9
10
Page 10
Operating
Instructions
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
3. Timer Button: Auto Start/Stop Feature
• When the unit is on, press the Timer
button. The “Timer off” LED indicator
light will illuminate indicating the Auto
stop feature has been activated.
• When the unit is off, press the Timer
button. The “Timer on” LED indicator
light will illuminate indicating the Auto
start feature has been activated.
• When the time of TIMER ON is displayed,
press the Timer button again. The TIMER
OFF indicator light illuminates. It indicates
the Auto Stop progra
m has initiated.
• Press or hold the UP (
) or DOWN ( )
button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will
count down the time remaining until start.
• The selected time will register in 5
seconds, and the system will automatically
revert back to display the previous
temperature setting or room temperature
when the unit is on. (when the unit is off,
there is no display.)
• Turning the unit ON or OFF at any time
or adjusting the timer setting to 0.0 will
cancel the Auto Start/Stop timed program.
1. ON/OFF Button
Press ON/OFF button to turn unit on or
off.
2. CONNECT Button
When connecting your air conditioner
to Wireless, press the CONNECT button
for 3 seconds to initiate the Wireless
connection mode. The display shows
‘AP’ to indicate the unit is in the Wireless
connection mod
e. Refer to the Wireless
section for further instructions.
If connection (router) is successful
within 8 minutes, the unit will exit Wireless
connection mode automatically and the
CONNECT indicator illuminates.
If connection failed within 8 minutes,
the unit exits Wireless connection mode
automatically and
the CONNECT
indicator does not illuminate.
After Wireless connection is successful,
you can press and hold CONNECT and
DOWN (
) buttons at the same time
for 3 seconds to turn off Wireless function
and the LED DISPLAY shows ‘OF’ for 3
seconds, press CONNECT and UP (
)
buttons at the same time to turn on WiFi
function and the LED DISPLAY shows
‘On’ for 3 seconds.
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the control panel, remote control, smart phone app or voice control.
NOTICE
To cancel timer operation, press and
hold the timer button for 2 seconds until
the beep/buzzer is heard.
Air Conditioner Features
To Next Page
Loading...
