11
b) Troubleshooting
Here are the recommended inspections of common failures:
kcehcotstnioPsmelborP
After the plug in the socket, the indicator
(1) and the screen do not light up.
Make sure that the plug is inserted
tightly. - Make sure that the switch,
socket, fuse and power line are in good
condition.
on (1) lights up but heating does
not start.
Make sure that the containers are
suitable for induction cooker.
- Sent it to service facility to repair
Heating stops suddenly during operation.
Let the appliance cool down
- Let air entry and air vent
free - Set again the timing
E3, E6
After a moment, temperature inside the
cooker returns to normal. The unit can
restore its work once the « on/off » button
is pressed.
E7, E8
After adjusting the voltage, the unit
restores its work.
Failure
codes
E1, E2, E4, E5, EB Send it to service facility to repair.
To Next Page
Loading...