Press the "▲" and "▼" buttons to select the
COOL MODE and HEAT MODE, and press
the "OK" button to enter the interface. The
interface display is as follows:
Operation instructions:
Press the "◄" and "►" buttons to select the
cool mode or the heat mode, press the "▲"
and "▼" buttons to adjust the parameter
value.
press the "OK" button to save the setting and
return to the previous interface,or press the
"BACK" button to cancel the setting and return
to the previous interface.
The value of T4 COOL_1 and T4 COOL_2 of
temp compensation-cool mode need to satisfy
the condition of T4 COOL_2-T4 COOL_1 >=0.
TEMP COMPENSATION- COOL MODE
SETPOINT T4 OFFSET
COOL_1 COOL_2 _C
25℃ 35℃ 10℃ NO
T4
COOL_1
ENABLE
TEMP COMPENSATION-HEAT MODE
SETPOINT T4 OFFSET
COOL_1 HEAT_2 _H
2℃ 15℃ 10℃ NO
T4
HEAT_1
ENABLE
OK
OK
◆Snow-Blowing switch
press the "▼" and "▲" buttons to select “SNOW-
BLOWING SWITCH” in the “USER MENU”
interface, press the "OK" button ,and the interface
display is as follows:
Press the "◄" and "►" buttons to select “YES”
OR “NO”, press the "OK" button to select. The
function of snow-blowing switch is valid when
selecting “YES”, while the function of snow-
blowing switch is invalid when selecting “NO”.
SNOW BLOWING SWITCH
SNOW BLOWING SWITCH
YES
ok
13
5
To Next Page
Loading...
Need help?
General