To Next PageTo Next Page
Need help?Do you have a question about the Midea Aqua Tempo Super MC-SS35/RN1L and is the answer not in the manual?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Compressor Type | Rotary |
| Heating Capacity | 3.8 kW |
| Energy Efficiency Ratio (EER) | 3.2 |
| Power Supply | 220-240V, 50Hz |
Describes the system's ability to combine multiple units for scalability and flexibility.
Outlines how unit failures are handled in a multi-unit system configuration.
Lists various built-in protection mechanisms ensuring safe chiller operation.
Shows specific wiring diagrams for SS series models.
Illustrates communication wiring for networked SS and SP series units.
Detailed cooling capacity and power data for SS series models.
Lists error and protection codes with their meanings for 25-130kW modules.
Provides common troubles and their corresponding corrective actions and solutions.
Presents flowchart-based troubleshooting steps for common protection faults.
Details procedures for transporting, installing, and positioning the chiller unit.
Covers the connection and setup of the chilled water piping system.
Details the standards and methods for connecting chilled water pipes.
Explains how factors like glycol and altitude affect performance.
Provides critical instructions for installing and regulating the water flow switch.
Covers all necessary steps and precautions for correct electrical wiring.
Lists essential safety and procedural guidelines for wiring installation.
Details the required power supply ratings, fuses, and wiring for different models.
Outlines rules for connecting wires to prevent interference and ensure safety.
Provides a step-by-step guide for executing the wiring connections.
Procedures for conducting the initial operational test and adjustments.
General maintenance advice focusing on key operational aspects.
Procedures for checking and maintaining the refrigerant system.
Critical measures to prevent freezing damage to the water system.
Guides on how to operate the unit using the wired controller.
Instructions for configuring operating modes and system parameters via the controller.
How to interpret and respond to error and alarm indicators on the controller.
Details the unit's control functions and integrated protection mechanisms.
