To Next PageTo Next Page
Need help?Do you have a question about the Midea Aqua Tempo Super MC-SP35M-RN1L and is the answer not in the manual?
Lists cooling, heating capacities, power input, compressor, refrigerant, condenser, and evaporator details.
Illustrates the refrigeration circuit for the 35kW SS series module.
Illustrates the refrigeration circuit for the 65/80kW SS series module.
Shows the refrigeration circuit for the 130kW SS series module with two compressors.
Illustrates the refrigeration circuit for SP series modules with one compressor.
Provides the wiring diagram for the MC-SS35/RN1L model.
Provides the wiring diagram for the MC-SP25-RN1L model.
Lists electrical characteristics for SS series models including power supply and compressor data.
Cooling capacity and power consumption tables for SS series models.
Cooling capacity and power consumption tables for SP series models.
Heating capacity and power consumption tables for SS series models.
Heating capacity and power consumption tables for SP series models.
Lists error and protection codes with definitions for specific chiller models.
Describes potential causes and solutions for high discharge pressure during cooling.
Flowchart for diagnosing and resolving high pressure/discharge temperature issues.
Offers solutions for low pressure protection faults via a flowchart.
Provides a flowchart for diagnosing and resolving current protection issues.
Flowchart for addressing high condenser temperature protection.
Flowchart for diagnosing and resolving water temperature difference issues.
Flowchart for addressing protection triggered by low ambient temperatures.
Flowchart for preventing and resolving cooling evaporator anti-freezing issues.
Flowchart for troubleshooting power supply phase sequence errors.
Flowchart for diagnosing and resolving communication errors.
Provides a flowchart for troubleshooting water flow detection issues.
Flowchart for diagnosing total outlet water temperature sensor issues.
Flowchart for diagnosing unit outlet water temperature sensor issues.
Flowchart for diagnosing unit inlet water temperature sensor issues.
Flowchart for diagnosing pipe temperature sensor issues for the condenser.
Flowchart for diagnosing ambient temperature sensor malfunctions.
General instructions for installing the water system, including pipe flushing and connections.
Details requirements for connecting chilled water pipes, including flushing and flow switches.
Details power supply requirements, fuses, and wiring sizes for different models.
Steps for preparing and conducting the test run, including system checks and controller setup.
Optional wired controller model KJR-120A/MBTE details.
General