Midea MCA3U-18HRFN1-M(C) User Manual

57
C. Micro-switch SW2-2 is for selection of Breezeless function.
Range: OFF, ON.
D. Micro-switch SW3 is for selection of auto-restart function.
Range: Active, inactive
E.Micro-switch SW6 is for selection of temperature compensation in heating mode. This helps to reduce
the real temperature difference between ceiling and floor so that the unit could run properly. If the height
of installation is lower, smaller value could be chosen.
Range: 6
o
C, 4
o
C, 2
o
C, E function (reserved for special customizing)
F. Micro-switch SW7 is for setting cooling &heating or cooling only.
Range: cooling &heating, cooling.

Midea MCA3U-18HRFN1-M(C) Specifications

General

Brand	Midea
Model	MCA3U-18HRFN1-M(C)
Category	Air Conditioner
Language	English