Page 33
13
Impedance Information
(Applicable to Middle East Countries only)
Impedance
Information
NOTE:
To be in compliance with EN61000-3-11, the product MCDT4-36CRN1-QC5W shall be connected only
to a supply of the system impedance: Zsys = 0.020 Ω or less. Before connecting the product to public
power network, please consult your local power supply authority to ensure the power network meet
above requirement.
To be in compliance with EN61000-3-11, the product MCDT4-48CRN1-QC5W shall be connected only
to a supply of the system impedance: Zsys = 0.264 Ω or less. Before connecting the product to public
power network, please consult your local power supply authority to ensure the power network meet
above requirement.
To Next Page
Loading...
Need help?
General
