EN-8
2)Remove the hinge cover and screw on the top right side of the box, as well as the upper hinge and
the hole cover on the left side.
3)Unscrew the hinge screw, take off
the middle hinge and the upper shaft sleeve, depart the two hinge
hole covers (plug pins) on the middle hinge, and take out the door body of the refrigerator chamber
upward.
1)Please power off this appliance before conduct this operation.
Hole cover
Sleeve
Hinge cover
Upper hinge
Plug pins
Middle hinge
Sleeve
Screw
To Next Page
Loading...
