Midea MDT24H3AST User Manual

31
Safety
Precautions
Operating
Requirements
Parts and
Features
Start Up
Guide
Controls
Dishwasher
Loading
Dishwasher
Use
Dishwasher
Care
Troubleshooting
RINSE AID DISPENSER
Under normal conditions, you will need to fill the rinse aid dispenser
approximately once a month. Rinse aid is released through an opening in
the dispenser. You do not need to wait until the dispenser is empty to refill
it. Try to keep it full, but be careful not to overfill it.
1. Open the dishwasher door.
2. Turn the rinse aid dispenser cap counterclockwise and pull up to
remove.
Full
Add
3. Pour rinse aid into the dispenser until the sight window indicates FULL.
4. You can adjust the amount of the rinse aid released during the rinse.
The higher the number the greater the amount of rinse aid released.
•
If your glassware has spots following the cycle, increase the rinse
aid setting.
•
If your glassware has streaks after the cycle, decrease the rinse aid
setting.
a
bc
a Dispenser Cap
b Less
c More
5. Clean up any spilled rinse aid with a damp cloth.
6. Replace the rinse aid cap, and then turn the cap clockwise to close.

Midea MDT24H3AST Specifications

General

Style	Free-Standing
Color	Stainless Steel
Load Capacity	14 Place Settings
Number of Cycles	6
Cycle Selections	Heavy
Options/Settings	Smart Control (Wi-Fi App)
Drying Type	Extended Dry (2 Fan Assisted)
Temperature Options	-
Noise level	45 dBA
Special Features	Single Touch Programming
Energy Class	-
Annual Energy Consumption	260 - 270 kWh
Energy Consumption Per Cycle	1.039 kWh
Annual Water Consumption	-
Water Consumption Per Cycle	-
Voltage	120V
Frequency	60 Hz
Current	-

Weight and Dimensions

Depth	24.5 in
Height	33.8 in
Width	23.9 in
Net Weight	110.3 lbs