MCAC-VTSM-2016-04 R410A DC Inverter VRF V4 Plus W Series 50Hz
General Information 5
2.4 Enhanced comfort
2.4.1 Low noise
Without outdoor units fan noise and fully enclosed design which realize lower noise.
2.5 Easy installation and service
2.5.1 Compact and lightweight
8,10,12HP three basic model with the same size and weight: W780mm×H1000mm×D550mm, 146kg.
It can be transported through the elevator or forklift.
More compact, can also be installed in the narrow space of the engine room.
2.5.2 Modular design
Modular design, one main unit can be installed above another one and greatly saved installation space.
Various installation environment: Storehouse, basement, close balcony, corridor, plant room and so on.
2.5.3 Auto addressing
Outdoor unit can distribute address for each indoor unit automatically.
Wireless and wired controllers can enquire and modify each indoor unit’s address.
2.5.4 Simple signal line connection
Installation is easier as communication wiring can be shared by indoor & outdoor units. It’s easy for the user to
retrofit the existing system with a centralized control by simply connecting to the outdoor units.
PQE & XYE: only one set of PQE communication wires can achieve communication among indoor units,
outdoor units and the network.
Reversible communication, central controller can be connected from indoor side or outdoor side as you
wish.
To Next Page
Loading...
Need help?
General