31
3. Larger food remnants can be
cleaned by rinsing the filter under
running water. For a more thorough
clean, use a soft cleaning brush.
4. Reassemble the filters in the reverse
order of the disassembly, replace the
filter insert, and rotate clockwise to
the close arrow.
It is necessary to clean the spray arms regularly for hard water chemicals will clog the
spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
Spray arms
EN
Do not over tighten the filters. Put the filters back in sequence securely, otherwise
coarse debris could get into the system and cause a blockage.
Never use the dishwasher without filters in place. Improper replacement of the filter
may reduce the performance level of the appliance and damage dishes and utensils.
1. To remove the upper spray arm,
hold the nut, rotate the arm
clockwise to remove it.
2. To remove the lower spray arm,
pull out the spray arm upward.
3. Wash the arms in soapy and warm
water and use a soft brush to clean
the jets. Replace them after rinsing
them thoroughly.
WARNING
To Next Page
Loading...
Need help?
General
