Need help?Do you have a question about the Midea MEHSU-18PHH2 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Noise Level (Indoor) | 42 dB(A) |
| Noise Level (Outdoor) | 54 dB(A) |
| Operating Temperature (Heating) | -7-24°C |
| Air Flow (Indoor) | 850 m³/h |
| Type | Split |
| Cooling Capacity | 18000 BTU/hr |
| Heating Capacity | 18000 BTU/h |
| Operating Temperature (Cooling) | 18-43 °C |
Instructions to prevent injury to users and property damage.
Important warnings for installation, operation, and electrical safety.
List of error codes, their meanings, and initial troubleshooting steps.
Diagram showing troubleshooting points on the outdoor unit PCB.
Steps to diagnose and resolve EEPROM parameter errors (E0/F4).
Troubleshooting procedure for refrigerant leakage detection (EC).
Steps to diagnose and fix overload current protection issues (F0).
Troubleshooting for IPM or IGBT over-strong current protection (P0).
Diagnosing and resolving over/under voltage protection faults (P1).
Troubleshooting high temperature protection for IPM module or compressor (P2).
Diagnosing errors related to the inverter compressor drive (P4).
Troubleshooting issues related to low pressure protection (P6).
To Next Page