To Next Page

To Previous Page

2 Electrical

parts

How to remove the electrical

parts.

1) Remove the front

panel from procedure 1.

2) Pull out the room temp.

sensor (T1). Remove the two

screws for the ground

connection.

3) Remove the fixing screw.

4) Pull out the coil temp.

sensor.

5) From the side direction,

open the electronic control box

cover fixing by clips. Pull out

the fan motor connector and

swing motor connector. Then

remove the electronic control

box.

②

③

④

⑤

②

Midea MEHSU-18PHH2 User Manual

Questions and Answers: