Need help?Do you have a question about the Midea MFGA-24CRN1-Q and is the answer not in the manual?
General| Refrigerant Type | R410A |
|---|---|
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18-43°C |
| Cooling Capacity | 24000 BTU/h |
Shows wiring diagrams for connecting the indoor unit to the outdoor unit and power supply.
Shows wiring diagrams for outdoor unit components like fans, compressors, and control boards.
Lists electrical specifications like voltage, frequency, and maximum fuse amps for outdoor units.
Provides instructions for lifting, fixing, and securing the outdoor unit during installation.
Details steps for choosing pipe size, measuring, cutting, flaring, and insulating copper pipes.
Outlines key principles for installing drainage pipes, including slope and diameter.
Details methods for ordinary and special vacuum drying procedures, including duration and checks.
Details the process for adding refrigerant after vacuum drying, based on pipe dimensions and length.
Emphasizes key points for safe and compliant electrical wiring installation by qualified personnel.
Details the specific checks to perform on both indoor and outdoor units during the test operation.
Explains compressor restart delay, sensor protection, phase check, low pressure, and over-current protections.
Details LED indications and digital displays for indoor unit malfunctions and protections.
To Next Page