MCAC-UTSM-2014-03 R410A 380~415V 3Ph 50Hz TempMaker Series Split AC
134
the key again, and the operation will be performed for all air conditioners in the network.
Press it repeatedly to shift between single setting and global setting.
4) QUERY: Any time when pressing the key, the selected operation mode is to query the
operation status of the air conditioner. By default, the first in-service air conditioner will be
queried. Through the ADD and REDUCE keys, the parameter page can be changed to be
queried. Through the , , and keys, the query status of other air conditioners can
be changed.
5) : In the query mode, every time when pressing the key, the operation status data of the air
conditioner corresponding to the previous row of the matrix will be displayed. If it is currently
in the first row, press the key, and the data of the air conditioner corresponding to the last
row will be displayed. If this key was held down, the row will decrease one by one. In the
setting mode, every time when press the key, if it is in the single operation mode, the air
conditioner corresponding to the last row will be selected. If it is in the global operation
mode, no effect will result after the key is pressed. In the main page, press the key to enter
the query mode. By default, it is the first in-service air conditioner.
6) : In the query mode, every time when pressing the key, the operation status data of the air
conditioner corresponding to the next row of the matrix will be displayed. If it is currently in
the last row, press the key, and the data of the air conditioner corresponding to the first row
will be displayed. If this key was held down, the row will increase one by one. In the setting
mode, every time when press the key, if it is in the single operation mode, the air conditioner
corresponding to the last row will be selected. If it is in the global operation mode, no effect
will result after the key is pressed. In the main page, press the key to enter the query mode.
By default, it is the first in-service air conditioner.
7) : In the query mode, every time when pressing the key, the operation status data of the
To Next Page
Loading...
Need help?
General
