MCAC-UTSM-2014-03 R410A 380~415V 3Ph 50Hz TempMaker Series Split AC
80
MHA-150HWN1 + MOV-150HN1-R
MHA-192HWN1 + MOV-192HN1-R
MFA2-76HRN1 + MOV-76HN1-R
MFA2-96HRN1 + MOV-96HN1-R
The refrigerant pipe adapter is located inside the outdoor unit. So remove the right front board
first, and remove M5 screws.
When the pipe is connected from the front side, the pipe can be led out through the right front
board.
When welding the refrigerant pipe, in order to prevent internal oxidation of the pipe, nitrogen
To Next Page
Loading...
Need help?
General
