Need help?Do you have a question about the Midea MHC-V22W/D2RN8 and is the answer not in the manual?
General| Compressor Type | Rotary |
|---|---|
| Cooling Capacity | 2200 W |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Type | Split System |
Details troubleshooting steps for E0 and E8 error codes (Water flow failure).
Details troubleshooting steps for E1 error code (Phase sequence error).
Details troubleshooting steps for E2 error code (Communication error).
Troubleshooting for various sensor errors on the hydronic system.
Troubleshooting for sensor errors on the outdoor unit refrigerant system.
Troubleshooting for EE error code (Hydronic system main PCB EEPROM error).
Troubleshooting for F1 error code (Low DC generatrix voltage).
Troubleshooting for HF error code (Outdoor unit inverter module EEPROM error).
Troubleshooting for H0 error code (Communication error between units).
Troubleshooting for H1 error code (Communication error between main boards).
Troubleshooting for H6 (DC fan error) and HH (repeated H6).
Troubleshooting for H7 error code (Abnormal main circuit voltage).
Troubleshooting for H8 error code (Pressure sensor error).
Troubleshooting for P0 (low pressure) and HP (repeated low pressure) errors.
Troubleshooting for P1 error code (High pressure protection).
Troubleshooting for P3 error code (Compressor overcurrent protection).
Troubleshooting for P4 error code (Discharge temperature protection).
Troubleshooting for P5 error code (High temp difference in water HX).
Details troubleshooting for inverter module errors (L0, L1, L2, L4, L5, L8, L9).
To Next Page